Download V0.14 - Released 2024-05-15

Release Notes:

  • Added CINE mode

    CINE MODE

    CINE mode converts the shutter speed into a combination shutter angle and framerate display. The mode is naturally shutter-priority and can’t be changed to aperture priority. The LEFT and RIGHT arrow buttons vary the currently selected value. To switch from changing the shutter angle to framerate and vise versa, enter the menu, navigate to the PRIORITY MODE screen, and change it there.

Download V0.13 - Released 2023-12-19

Release Notes:

  • Added a Whole stops + Fractional stops display, similar to what is offered from other manufacturers. The subscript number will count up from 0-9 until the aperture value will roll over to the next whole stop, rather than being rounded up or down to the nearest whole stop. This function is only available in a whole stop mode. The “STOP INCREMENTS” menu now has WHOLE + FRACTIONAL option added to enable this. After upgrading, your previously selected stop increments mode may need to be re-selected.

Download V0.12 - Released 2022-08-15

Release Notes:

  • Battery level now displayed in main menu

  • Battery type selection added to config. menu

Download V0.11 - Released 2022-04-25

Release Notes:

  • Fixed bug with readings too low to measure

Download V0.10 - Released 2022-03-01

Release Notes:

  • Fixed bug where high light levels on startup may cause the meter to stall

  • Fixed bug where first Average/Zone/PMM mode reading won’t advance to final screen and will restart process, if power/sample button is pressed too quickly

Download V0.9 - Released 2022-01-28

Release Notes:

  • Fixed bug where unexpected power loss (either during update or when batteries are low) could cause firmware corruption and brick device

  • Added ISO 64

Download V0.8 - Released 2022-01-21

Release Notes:

  • Fixed bug where selected Zone/descriptor was not being applied to the aperture/shutter values (only showed Zone 5/Middle Grey)

  • Removed battery low warning - battery voltages are not stable and so the information is not helpful

  • Changed Average/Zone/P.M.M to reset for another reading by pressing the power button instead of entering the menu

 Download V0.7 - Released 2022-01-14

Release Notes:

  • Fixed bug where calculated shutter/aperture did not return to original value when exiting Compare mode

Download V0.6 - Released 2021-12-11

Release Notes:

  • 2-Spot Average, Zone mode and P.M.M. Modes can now be reset to Step 1 by entering the menu at any step in the process. Previously the process had to be completed before it could be reset (again by entering the menu).

Download V0.5 - Released 2021-12-01

Release Notes:

  • Added automatic screen brightness adjustment feature

  • Shortened maximum screen off time to 30s

Download V0.4 - Released 2021-10-05

Release notes:

  • Fixed bug when power off time is set to “DISABLE” - meter will shut down randomly

  • Removed “DISABLE” power off time option as the meter will never turn off in this configuration